Dell 710 H2C, DCDO service manual Maintenance, POST Behavior, Setup & Boot Menu default

Maintenance
Service Tag	Displays the system service tag.
Load Defaults	This setting restores the computer's
	factory-installed default settings.
	Cancel — Do not restore factory-
	installed default settings.
	Continue — Restore factory-
	installed default settings.
Event Log	Displays the system event log.
	Mark all entries — Mark all event
	log entries as read (R).
	Clear log — Clear all event log
	entries.
	NOTE: Once an event log entry is marked
	as read (R) that entry cannot be marked
	as unread (U).

POST Behavior

Fastboot

(On default)

Numlock Key

(On default)

POST Hotkeys

(Setup & Boot Menu default)

Enables or disables the option to speed up the boot process by skipping some compatibility tests.

Off — Do not skip any steps in the boot process.

On — Boot quickly.

Enables or disables the numerical and mathematical features of the rightmost bank of keys on the keyboard.

Off — Right keypad keys function as arrows.

On — Right keypad keys function as numbers.

Specifies the function keys to display on the screen when the computer starts.

Setup & Boot Menu — Display both messages (F2=Setup and F12=Boot Menu).

Setup — Display the setup message only (F2=Setup).

Boot Menu — Display the Quickboot message only (F12=Boot Menu).

None — Neither message is displayed.

Keyboard Errors	Enables or disables keyboard error
(Report default)	reporting when the computer starts.
	Report — Display any keyboard
	errors.
	Do not report — Do not display
	any keyboard errors.