Dell DCDO, 710 H2C service manual Removing PCI and PCI Express Cards, PCI Express x16 card slot

1	PCI card	2	PCI Express x16 card	3	PCI Express x16 card slot
4	PCI Express x8 card	5	PCI Express x8 card slot	6	PCI Express x1 card
7	PCI Express x1 card slot

Removing PCI and PCI Express Cards

NOTICE: To avoid electrostatic discharge and damage to internal components, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface on the computer chassis.

NOTICE: If your computer came with a PCI graphics card installed, removal of the card is not necessary when installing additional graphics cards; however, the card is required for troubleshooting purposes. If you remove the card, store it in a safe and secure location.

NOTICE: If you have the optional dual graphics card configuration, see Removing a PCI Express Graphics Card from a Dual Configuration to remove or replace a graphics card.

1.Follow the procedures in Before You Begin.

2.Remove the computer cover (see Removing the Computer Cover).

3.Disconnect any cables connected to the card.

4.Press down the tab on the top of the card retainer at the appropriate card slot and pivot the card retainer back through the chassis wall.

5.If present, press the tab on the card retention device that lays over the installed cards and lift it to gain full access to the card.