Dell DCDO, 710 H2C service manual cutouts

1 memory connector closest to processor 2 securing clips (2) 3 memory connector 4. Align the notch on the bottom of the module with the crossbar in the connector.

1	cutouts (2)	2	memory module	3	notch
4	crossbar
	NOTICE: To avoid damage to the memory module, press the module straight down into the connector while you apply
	equal force to each end of the module.
5.	Insert the module into the connector until the module snaps into position.

If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.

6. Replace the computer cover (see Replacing the Computer Cover).

NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.