Manuals / Dell / Computer Equipment / Personal Computer

Dell 710 H2C, DCDO service manual

Models: 710 H2C DCDO

1 87
Download 87 pages 31.98 Kb
Page 55
Image 55
Manual background

CAUTION: The processor heat sink can get very hot during normal operation. Be sure that the heat sink has had sufficient time to cool before you touch it.

3.Remove the drive panel (see Removing the Drive Panel).

4.Slide the drive release latch towards the base of the computer to release the shoulder screw(s) on the CD/DVD drive(s), then slide the CD/DVD drive(s) forward, out of the way.

NOTE: It is not necessary to disconnect the CD/DVD drive cables unless you intend to fully remove the CD/DVD drive(s) from the computer. For information on how to remove a CD/DVD drive see Removing a CD/DVD Drive.

1

drive release latch

2

CD/DVD drive

5.Remove any full-length expansion cards (see Removing PCI and PCI Express Cards).

6.Disconnect the liquid cooling assembly power cable.

7.Disconnect the liquid cooling assembly cable from the TEC_PUMP connector on the system board (see System Board Components).

Page 54 Page 56
Page 55
Image 55
Dell 710 H2C, DCDO service manual
Page 54 Page 56