Dell 710 H2C, DCDO service manual Installing a Media Card Reader, shoulder screws

NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.

8. Connect the computer and devices to electrical outlets, and turn them on.

Installing a Media Card Reader

1.Follow the procedures in Before You Begin.

2.Remove the computer cover (see Removing the Computer Cover).

3.Remove the drive panel (see Removing the Drive Panel).

4.Remove the existing media card reader, if applicable (see Removing a Media Card Reader).

5.If no screws are attached to the Media Car d Reader, check the inside of the drive panel for shoulder screws. If screws are present, attach the screws to the new card reader.

1 media card reader 2 shoulder screws (4)

6. Slide the Media Card Reader into the drive bay until it clicks into place.