Dell DCDO, 710 H2C service manual Back to Contents Page, hinge slots

2.Ensure that no tools or extra parts are left inside the computer.

3.Pivot the cover down and into position.

4.Press down on the cover until it clicks into place.

NOTE: The computer cover should easily snap into place; however, if necessary, pull back on the cover release latch until the cover is completely closed, then slide the release latch forward to secure the cover.

1 computer cover 2 cover hinge tabs 3 hinge slots

5.Carefully, lift the rear of the computer and slide the stabilizing feet outward into the open position.

6.With the help of an assistant, carefully set the computer upright.

NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.

7.Connect your computer and devices to electrical outlets, and turn them on.

Back to Contents Page