Acer G530 Series manual Following order SATA0, SATA1, SATA2, then SATA3

48 3 System upgrade

(2)Attach the system’s power cable to the SATA power cable connector on the backplane board (2).

Note: The SATA RAID data cables must be installed and removed

in the following order: SATA0, SATA1, SATA2, then SATA3.

6 Observe the post-installation instructions described on page 36.

Important: When you are removing the hot-plug cage from the chassis, make sure to first remove all hard disks from their carriers. For instructions, see “Installing an additional hard disk into the HDD cage carrier” on page 53.

7Change the RAID configuration of your hard disk. For details on how to change the RAID configuration of your hard disk, go to “Appendix C: SATA RAID configuration” on page 167.