Acer G530 Series manual Opening the server, Removing the left-side panel

37

Opening the server

Caution! Before you proceed, make sure that you have turned off the system and all peripherals connected to it. Read the “Pre- installation instructions” on page 35.

You need to open the server before you can install additional components. The front bezel and left-side panel are removable to allow access to the system’s internal components. Refer to the following sections for instructions.

Removing the left-side panel

1Observe the ESD precautions and pre-installation instructions described on page 35.

2Remove the left-side panel.

(1)Remove the two screws located on the rear edge of the left- side panel (1).

(2)Press the left-side panel release button (2).

(3)Slide the left-side panel toward the rear of the chassis (3).