98 |
| 4 BIOS setup | |
|
|
| |
Parameter | Description | Option |
|
|
|
|
|
USB 2.0 | Enables the USB 2.0 controller. | Enabled | |
Controller |
| Disabled | |
|
|
|
|
USB 2.0 | Sets the transfer rate at HiSpeed (480 | HiSpeed | |
Controller | Mbps) or FullSpeed (12 MBps). | FullSpeed | |
Mode |
|
|
|
USB Mass
Storage Device
Configuration
Lets you specify the settings of the USB mass storage class devices.
Press Enter to access the USB Mass Storage Device Configuration submenu.
USB Mass Storage Device Configuration
The USB Mass Storage Device Configuration submenu lets you specify settings for a USB mass storage device, such as a USB
Parameter | Description | Option |
|
|
|
USB Mass | Select the number of seconds POST waits |
Storage Reset | for the USB mass storage device after the |
Delay | start unit command. |
20 Sec
10Sec
30Sec
40Sec
Device #1 | Type of USB mass storage device. |
Emulation | When set to Auto, USB mass storage |
Type | devices with less than 530 MB will be |
| emulated as a floppy and the remaining |
| drives are hard drives. |
| The Forced FDD option can be used to |
| force a formatted HDD to boot as a FDD. |
Auto
Floppy
Forced FDD
Hard Disk
