
111
Parameter | Description | Option |
|
|
|
User Access | When set to Full Access, allows access to |
Level | any field in the BIOS setup utility. |
| When set to No Access, user is not |
| allowed to access the BIOS setup utility. |
| When set to View Only, allows access to |
| the BIOS setup utility but fields cannot |
| be changed. |
| When set to Limited, allows access to |
| Date and Time in the BIOS setup utility. |
Full Access
No Access
View Only
Limited
Clear User Password
Clears the User password.
Note: This parameter is grayed out when the Administrator password is not set.
Fixed Disk | Enable or disables Boot Sector Virus | Disabled |
Boot Sector | Protection. | Enabled |
Protect |
|
|
|
|
|
Password On | Select Enabled to activate security check | Disabled |
Boot | during POST. | Enabled |
|
|
|
NMI Control | Enables or disables NMI control. | Disabled |
|
| Enabled |
|
|
|
Setting the Administrator/User password:
1Use the up/down keys to highlight a password parameter (Administrator Password or User Password) then press Enter.
A password box will appear.
2Type a password then press Enter.
The password may consist of up to six alphanumeric characters
3Retype the password to verify the first entry then press Enter again.
After setting the password, the system automatically sets the chosen password parameter to Installed.