TP-Link MC200CM, MC220L, MC210CS manual Installation Guides, Gigabit Ethernet Media Converter

¾AUTO: The FX port operates in Auto-Negotiation mode.

Note:

Be sure the opposite end is using the same setting. When using two converters at the same time, the two converters must be set to FORCE mode. When connected to other products, such as TL- SL2210WEB or TL-SL2428WEB, the converter must be set to Auto- Negotiation mode. We suggest leaving the switches on AUTO.

Please reset the converter after configuring the switches. Then the change would take effect.

4.Installation Guides

4.1Gigabit Ethernet Media Converter:

¾The SC fiber connector of MC200CM transmits/receives data by 850nm short wave laser on multi-mode fiber.

¾The SC fiber connector of MC210CS transmits/receives data by 1310nm short wave laser on single-mode fiber.

Transmits and receives data on different fibers

5