SMC Networks SMC6724L3 manual Command Usage, Command Attribute

CONFIGURING THE SWITCH

Command Usage

Due to a switch chip limitation, the input rate limit can only be enabled or disabled globally for all interfaces on the switch. However, the output rate limit can be enabled or disabled for individual interfaces.

Command Attribute

•Rate Limit – Sets the input or output rate limit for an interface.

Default Status – Disabled

Default Rate – Fast Ethernet: 100 Mbps, Gigabit Ethernet: 1000 Mbps

Range – Fast Ethernet: 1 - 100 Mbps (at a resolution of 1 Mbps),

Gigabit Ethernet: 1 - 1000 Mbps (at an resolution of 8 Mbps)

Web - Click Rate Limit, Input/Output Rate Limit Port/Trunk Configuration. Set the Input Rate Limit Status (for all interfaces), or set the Output Rate Limit Status (for selected interfaces), then set the rate limit for individual interfaces, and click Apply.

3-78