SMC Networks SMC6724L3 manual Map ip precedence Global Configuration

PRIORITY COMMANDS

map ip precedence (Global Configuration)

Use this command to enable IP precedence mapping (i.e., IP Type of Service). Use the no form to disable IP precedence mapping.

Syntax

map ip precedence no map ip precedence

Default Setting

Disabled

Command Mode

Global Configuration

Command Usage

•The precedence for priority mapping is IP Port, IP Precedence or IP DSCP, and default switchport priority.

•IP Precedence and IP DSCP cannot both be enabled. Enabling one of these priority types will automatically disable the other type.

Example

The following example shows how to enable IP precedence mapping globally:

Console(config)#map ip precedence

Console(config)#

map ip precedence (Interface Configuration)

Use this command to set IP precedence priority (i.e., IP Type of Service priority). Use the no form to restore the default table.

Syntax

map ip precedence ip-precedence-value cos cos-value no map ip precedence

•precedence-value- 3-bit precedence value. (Range: 0-7)

•cos-value- Class-of-Service value (Range: 0-7)

4-189