SMC Networks SMC6724L3 manual Spanning Tree Commands, 146

COMMAND LINE INTERFACE

Spanning Tree Commands

This section includes commands that configure the Spanning Tree Algorithm (STA) globally for the switch, and commands that configure STA for the selected interface.

Command	Function	Mode	Page
spanning-tree	Enables the spanning tree protocol	GC	4-147
spanning-tree mode	Configures STP or RSTP mode	GC	4-148
spanning-tree	Configures the spanning tree bridge	GC	4-149
forward-time	forward time
spanning-tree	Configures the spanning tree bridge hello	GC	4-150
hello-time	time
spanning-tree	Configures the spanning tree bridge	GC	4-150
max-age	maximum age
spanning-tree priority	Configures the spanning tree bridge priority	GC	4-151
spanning-tree	Configures the path cost method for RSTP	GC	4-152
path-cost method
spanning-tree	Configures the transmission limit for RSTP	GC	4-153
transmission-limit
spanning-tree cost	Configures the spanning tree path cost of	IC	4-154
	an interface
spanning-tree	Configures the spanning tree priority of an	IC	4-155
port-priority	interface
spanning-tree	Enables fast forwarding for edge ports	IC	4-156
edge-port
spanning-tree	Sets an interface to fast forwarding	IC	4-157
portfast
spanning-tree	Configures the link type for RSTP	IC	4-158
link-type
spanning-tree	Re-checks the appropriate BPDU format	PE	4-159
protocol-migration
show spanning-tree	Shows spanning tree configuration for the	PE	4-160
	overall bridge or a selected interface

4-146