SMC Networks SMC6724L3 manual CLI only

USER AUTHENTICATION

•Timeout for Quiet Period – Sets the time that a switch port waits after the dot1X Max Request Count has been exceeded before attempting to acquire a new client. (Range: 1-65535 seconds; Default: 60 seconds)

•Timeout for Re-authentication Period – Sets the time period after which a connected client must be re-authenticated. (Range: 1-65535 seconds; Default: 3600 seconds)

•Timeout for TX Period – Sets the time period during an authentication session that the switch waits before re-transmitting an EAP packet. (Range: 1-65535; Default: 30 seconds)

•authentication dot1x default* – Sets the default authentication server type. Note that the specified authentication server type must be enabled and properly configured for dot1x to function properly.

(Options: radius).

* CLI only.

Web – Select dot1X, dot1X Configuration. Enable dot1x globally for the switch, modify any of the parameters required, and then click Apply.

CLI – This example enables re-authentication and sets all of the global parameters for dot1x.

Console(config)#dot1x re-authentication	4-69
Console(config)#dot1x max-req 5	4-68
Console(config)#dot1x timeout quiet-period 40	4-70
Console(config)#dot1x timeout re-auth 5	4-70
Console(config)#dot1x timeout tx-period 40	4-71
Console(config)#authentication dot1x default radius	4-67
Console(config)#

3-37