SMC Networks SMC6724L3 manual Clock timezone, None

COMMAND LINE INTERFACE

Command Usage

This command displays the current time, the poll interval used for sending time synchronization requests (when the switch is set to SNTP client mode), and the current SNTP mode (i.e., client or broadcast).

Example

Console#show sntp

Current time: Dec 23 05:13:28 2002

Poll interval: 16

Current mode: unicast

Console#

clock timezone

Use this command to set the time zone for the switch’s internal clock.

Syntax

clock timezone name hour hours minute minutes {before-utc after-utc}

•name - Name of timezone, usually an acronym. (Range: 1-29 characters)

•hours - Number of hours before/after UTC. (Range: 1-12 hours)

•minutes - Number of minutes before/after UTC. (Range: 0-59 minutes)

•before-utc- Sets the local time zone before (east) of UTC.

•after-utc- Sets the local time zone after (west) of UTC.

Default Setting

None

Command Mode

Global Configuration

Command Usage

This command sets the local time zone relative to the Coordinated Universal Time (UTC, formerly Greenwich Mean Time or GMT), based on the earth’s prime meridian, zero degrees longitude. To display

4-46