SMC Networks SMC6724L3 manual Configuring a Standard IP ACL

ACCESS CONTROL LISTS

Web – Click ACL, ACL Configuration. Enter an ACL name in the Name field, select the list type (IP Standard, IP Extended, or MAC), and click Add to open the configuration page for the new list.

CLI – This example creates a standard IP ACL named bill.

Console(config)#access-list ip standard bill	4-76
Console(config-std-acl)#

Configuring a Standard IP ACL

Command Attributes

•Action – An ACL can contain all permit rules or all deny rules. (Default: Permit rules)

•IP – Specifies the source IP address. Use “Any” to include all possible addresses, “Host” to specify a specific host address in the Address field, or “IP” to specify a range of addresses with the Address and SubMask fields. (Options: Any, Host, IP; Default: Any)

•Address – Source IP address.

•SubMask – A subnet mask containing four integers from 0 to 255, each separated by a period. The mask uses 1 bits to indicate “match” and 0 bits to indicate “ignore.” The mask is bitwise ANDed with the specified source IP address, and compared with the address for each IP packet entering the port(s) to which this ACL has been assigned.

3-43