SMC Networks SMC6724L3 manual Clear mac-address-table dynamic, Action

COMMAND LINE INTERFACE

•action -

-delete-on-reset- Assignment lasts until the switch is reset.

-permanent - Assignment is permanent.

Default Setting

No static addresses are defined. The default mode is permanent.

Command Mode

Global Configuration

Command Usage

The static address for a host device can be assigned to a specific port within a specific VLAN. Use this command to add static addresses to the MAC Address Table. Static addresses have the following characteristics:

•Static addresses will not be removed from the address table when a given interface link is down.

•Static addresses are bound to the assigned interface and will not be moved. When a static address is seen on another interface, the address will be ignored and will not be written to the address table.

•A static address cannot be learned on another port until the address is removed with the no form of this command.

Example

Console(config)#mac-address-table static 00-e0-29-94-34-de interface ethernet 1/1 vlan 1 delete-on-reset

Console(config)#

clear mac-address-table dynamic

Use this command to remove any learned entries from the forwarding database and to clear the transmit and receive counts for any static or system configured entries.

Default Setting

None

4-142