SMC Networks SMC6724L3 Address Table Commands, Mac-address-table static, Mac-address- MAC address

ADDRESS TABLE COMMANDS

Address Table Commands

These commands are used to configure the address table for filtering specified addresses, displaying current entries, clearing the table, or setting the aging time.

Command	Function	Mode	Page
mac-address-table	Maps a static address to a port in a VLAN	GC	4-141
static
clear	Removes any learned entries from the	PE	4-142
mac-address-table	forwarding database
dynamic
show	Displays entries in the bridge-forwarding	PE	4-143
mac-address-table	database
mac-address-table	Sets the aging time of the address table	GC	4-144
aging-time
show	Shows the aging time for the address table	PE	4-145
mac-address-table
aging-time

mac-address-table static

Use this command to map a static address to a destination port in a VLAN. Use the no form to remove an address.

Syntax

mac-address-table static mac-addressinterface interface vlan vlan-id[action]

no mac-address-table static mac-addressvlan vlan-id

•mac-address- MAC address.

•interface

•ethernet unit/port

-unit - This is device 1.

-port - Port number.

•port-channel channel-id(Range: 1-4)

•vlan-id- VLAN ID (Range: 1-4094)

4-141