SMC Networks SMC6724L3 manual Enabling the Server, Setting Excluded Addresses

CONFIGURING THE SWITCH

Enabling the Server, Setting Excluded Addresses

Enable the DHCP Server and specify the IP addresses that it should not be assigned to clients.

Command Attributes

•DHCP Server – Enables or disables the DHCP server on this switch. (Default: Disabled)

•Excluded Addresses – Specifies IP addresses that the DHCP server should not assign to DHCP clients. You can specify a single address or an address range.

Note: Be sure you exclude the address for this switch and other key network devices.

Web – Click DHCP, Server, General. Enter a single address or an address range, and click Add.

CLI – This example enables the DHCP and sets an excluded address range.

Console(config)#service	dhcp	4-103
Console(config)#ip dhcp	excluded-address 10.1.0.250
10.1.0.254		4-104
Console#

3-56