SMC Networks SMC6724L3 manual Syntax Speed bps no speed, 9600 bps

COMMAND LINE INTERFACE

speed

Use this command to set the terminal line’s baud rate. This command sets both the transmit (to terminal) and receive (from terminal) speeds. Use the no form to restore the default setting.

Syntax

speed bps no speed

bps - Baud rate in bits per second.

(Options: 9600, 19200, 38400, 57600, 115200 bps)

Default Setting

9600 bps

Command Mode

Line Configuration

Command Usage

Set the speed to match the baud rate of the device connected to the serial port. Some baud rates available on devices connected to the port might not be supported. The system indicates if the speed you selected is not supported.

Example

To specify 57600 bps, enter this command:

Console(config-line)#speed 57600

Console(config-line)#

4-22