SMC Networks SMC6724L3 manual 125

CONFIGURING THE SWITCH

port connected to a hub unless it is actually required to solve a problem. Otherwise back pressure jamming signals may degrade overall performance for the segment attached to the hub.)

(Default: Autonegotiation enabled; Advertised capabilities for 100BASE-TX – 10half, 10full, 100half, 100full; 1000BASE-T – 10half, 10full, 100half, 100full, 1000full; 1000BASE-SX/LX/LH – 1000full)

•Trunk – Indicates if a port is a member of a trunk. To create trunks and select port members, see “Trunk Configuration” on page 3-79.

Note: Auto-negotiation must be disabled before you can configure or force the interface to use the Speed/Duplex Mode or Flow Control options.

Web – Click Port, Port Configuration or Trunk Configuration. Modify the required interface settings, and click Apply.

CLI – Select the interface, and then enter the required settings.

Console(config)#interface ethernet 1/13	4-119
Console(config-if)#description RD SW#13	4-119
Console(config-if)#shutdown	4-125
.
Console(config-if)#no shutdown
Console(config-if)#no negotiation	4-121
Console(config-if)#speed-duplex 100half	4-120
Console(config-if)#flowcontrol	4-124
.
Console(config-if)#negotiation
Console(config-if)#capabilities 100half	4-122
Console(config-if)#capabilities 100full
Console(config-if)#capabilities flowcontrol

3-68