SMC Networks SMC6724L3 manual Queue bandwidth weight1...weight4 no queue bandwidth

PRIORITY COMMANDS

Example

The following example shows how to set a default priority on port 3 to 5:

Console(config)#interface ethernet 1/3

Console(config-if)#switchport priority default 5

queue bandwidth

Use this command to assign weighted round-robin (WRR) weights to the four class of service (CoS) priority queues. Use the no form to restore the default weights.

Syntax

queue bandwidth weight1...weight4 no queue bandwidth

weight1...weight4 - The ratio of weights for queues 0 - 3 determines the weights used by the WRR scheduler. (Range: 1 - 255)

Default Setting

Weights 1, 4, 16 and 64 are assigned to queue 0, 1, 2 and 3 respectively.

Command Mode

Global Configuration

Command Usage

WRR controls bandwidth sharing at the egress port by defining scheduling weights.

Example

The following example shows how to assign WRR weights of 1, 3, 5 and 7 to the CoS priority queues 0, 1, 2 and 3:

Console(config)#queue bandwidth 1 3 5 7

Console(config)#

Related Commands

show queue bandwidth (4-185)

4-183