SMC Networks SMC6724L3 manual Syntax Channel-group channel-idno channel-group

COMMAND LINE INTERFACE

•All the ports in a trunk have to be treated as a whole when moved from/to, added or deleted from a VLAN via the specified port-channel.

•STP, VLAN, and IGMP settings can only be made for the entire trunk via the specified port-channel.

channel-group

Use this command to add a port to a trunk. Use the no form to remove a port from a trunk.

Syntax

channel-group channel-idno channel-group

channel-id- Trunk index (Range: 1-6)

Default Setting

The current port will be added to this trunk.

Command Mode

Interface Configuration (Ethernet)

Command Usage

•When configuring static trunks, the switches must comply with the Cisco EtherChannel standard.

•Use no channel-groupto remove a port group from a trunk.

•Use no interfaces port-channelto remove a trunk from the switch.

Example

The following example creates trunk 1 and then adds port 11:

Console(config)#interface port-channel 1

Console(config-if)#exit

Console(config)#interface ethernet 1/11

Console(config-if)#channel-group 1

Console(config-if)#

4-138