SMC Networks SMC6724L3 manual Ip dhcp restart client, Interface Configuration Vlan

COMMAND LINE INTERFACE

Default Setting

None

Command Mode

Interface Configuration (VLAN)

Command Usage

This command is used to include a client identifier in all communications with the DHCP server. The identifier type depends on the requirements of your DHCP server.

Example

Console(config)#interface vlan 2

Console(config-if)#ip dhcp client-identifier hex 00-00-e8-66-65-72 Console(config-if)#

Related Commands

ip dhcp restart client (4-98)

ip dhcp restart client

Use this command to submit a BOOTP or DHCP client request.

Default Setting

None

Command Mode

Privileged Exec

Command Usage

•This command issues a BOOTP or DHCP client request for any IP interface that has been set to BOOTP or DHCP mode via the ip address command.

•DHCP requires the server to reassign the client’s last address if available.

4-98