SMC Networks SMC6724L3 Show snmp, Use this command to check the status of Snmp communications

SNMP COMMANDS

notifications are enabled. If you enter the command with a keyword, only the notification type related to that keyword is enabled.

•The snmp-server enable traps command is used in conjunction with the snmp-server host command. Use the snmp-server host command to specify which host or hosts receive SNMP notifications. In order to send notifications, you must configure at least one snmp-server host command.

Example

Console(config)#snmp-server enable traps link-up-down

Console(config)#

Related Commands

snmp-server host (4-93)

show snmp

Use this command to check the status of SNMP communications.

Default Setting

None

Command Mode

Normal Exec, Privileged Exec

Command Usage

This command provides information on the community access strings, counter information for SNMP input and output protocol data units, and whether or not SNMP logging has been enabled with the snmp-server enable traps command.

4-95