SMC Networks SMC6724L3 manual Pvlan, Following example shows how to display information for Vlan

VLAN COMMANDS

Example

The following example shows how to display information for VLAN 1:

Console#show	vlan id 1
VLAN Type	Name	Status	Ports/Channel groups
---- ------- ---------------- ---------			----------------------------------
1 Static	DefaultVlan	Active	Eth1/ 1	Eth1/ 2	Eth1/ 3	Eth1/ 4	Eth1/ 5
			Eth1/ 6	Eth1/ 7	Eth1/ 8	Eth1/ 9	Eth1/10
			Eth1/11	Eth1/12	Eth1/13	Eth1/14	Eth1/15
			Eth1/16	Eth1/17	Eth1/18	Eth1/19	Eth1/20
			Eth1/21 Eth1/22		Eth1/23	Eth1/24	Eth1/25
			Eth1/26
Console#

Configuring Private VLANs

Private VLANs provide port-based security and isolation between ports within the assigned VLAN. This section describes commands used to configure private VlANs.

Command	Function	Mode	Page
pvlan	Enables and configured private VLANS	GC	4-173
show pvlan	Displays the configured private VLANS	PE	4-174

pvlan

Use this command to enable or configure a private VLAN. Use the no form to disable the private VLAN.

Syntax

pvlan [up-linkinterface-list down-linkinterface-list]no pvlan

•up-link– Specifies an uplink interface.

•down-link– Specifies a downlink interface.

Default Setting

No private VLANs are defined.

Command Mode

Global Configuration

4-173