SMC Networks SMC6724L3 manual 236, Displaying Interface Information

CONFIGURING THE SWITCH

Displaying Interface Information

You can display a summary of the current interface status for PIM-DM, including the number of neighboring PIM routers, and the address of the designated PIM router.

Command Attributes

•Interface – A VLAN interface on this router.

•Address – The IP address for this interface.

•Mode – The PIM mode in use. (This router only supports Dense Mode at this time.)

•Neighbor Count – The number of PIM neighbors detected on this interface.

•DR Address – The designated PIM router for this interface.

Web – Click Routing Protocol, PIM-DM, Interface Information.

CLI – This example shows the PIM-DM interface summary for VLAN 1.

Console#show ip pim interface 1		4-309
Vlan 1 is	up
PIM is enabled, mode is Dense.
Internet	address is 10.1.0.253.

Hello time interval is 30 sec, trigger hello time interval is 5 sec. Hello holdtime is 105 sec.

Join/Prune holdtime is 210 sec.

Graft retry interval is 3 sec, max graft retries is 2. DR Internet address is 10.1.0.253, neighbor count is 1.

Console#

3-236