SMC Networks SMC6724L3 manual Displaying Address Bindings

CONFIGURING THE SWITCH

CLI – This example configures a host address pool.

Console(config)#ip dhcp pool mgr	4-104
Console(config-dhcp)#host 10.1.0.19 255.255.255.0	4-113
Console(config-dhcp)#hardware-address 00-e0-29-94-34-28
ethernet	4-115
Console(config-dhcp)#client-identifier text bear	4-114
Console(config-dhcp)#default-router 10.1.0.253	4-106
Console(config-dhcp)#dns-server 10.2.3.4	4-108
Console(config-dhcp)#netbios-name-server 10.1.0.33	4-110
Console(config-dhcp)#netbios-node-type hybrid	4-111
Console(config-dhcp)#domain-name example.com	4-107
Console(config-dhcp)#bootfile wme.bat	4-109
Console(config-dhcp)#next-server 10.1.0.21	4-109
Console(config-dhcp)#lease infinite	4-112
Console(config-dhcp)#

Displaying Address Bindings

You can display the host devices which have acquired an IP address from this switch’s DHCP server.

Command Attributes

•IP Address – IP address assigned to host.

•Mac Address – MAC address of host.

•Lease time – Duration that this IP address can be used by the host.

•Start time – Time this address was assigned by the switch.

•Delete – Clears this binding to the host. This command is normally used after modifying the address pool, or after moving DHCP service to another device.

•Entry Count – Number of hosts that have been given addresses by the switch.

Note: More than one DHCP server may respond to a service request by a host. In this case, the host generally accepts the first address assigned by any DHCP server.

3-62