SMC Networks SMC6724L3 manual Ip igmp snooping vlan mrouter, 286

COMMAND LINE INTERFACE

ip igmp snooping vlan mrouter

Use this command to statically configure a multicast router port. Use the no form to remove the configuration.

Syntax

ip igmp snooping vlan vlan-idmrouter interface no ip igmp snooping vlan vlan-idmrouter interface

•vlan-id- VLAN ID (Range: 1-4094)

•interface

•ethernet unit/port

-unit - This is device 1.

-port - Port number.

•port-channel channel-id(Range: 1-6)

Default Setting

No static multicast router ports are configured.

Command Mode

Global Configuration

Command Usage

Depending on your network connections, IGMP snooping may not always be able to locate the IGMP querier. Therefore, if the IGMP querier is a known multicast router/switch connected over the network to an interface (port or trunk) on your router, you can manually configure that interface to join all the current multicast groups.

Example

The following shows how to configure port 11 as a multicast router port within VLAN 1:

Console(config)#ip igmp snooping vlan 1 mrouter ethernet 1/11 Console(config)#

4-286