SMC Networks SMC6724L3 manual 138

TRUNK CONFIGURATION

Web – Click Trunk, Trunk Configuration. Enter a trunk ID of 1-6 in the Trunk field, select any of the switch ports from the scroll-down port list, and click Add. After you have completed adding ports to the member list, click Apply.

CLI – This example creates trunk 2 with ports 11 and 12. Just connect these ports to two static trunk ports on another switch to form a trunk.

Console(config)#interface port-channel 2	4-119
Console(config-if)#exit
Console(config)#interface ethernet 1/11	4-119
Console(config-if)#channel-group 1	4-138
Console(config-if)#exit
Console(config)#interface ethernet 1/12
Console(config-if)#channel-group 1
Console(config-if)#end
Console#show interfaces status port-channel 1	4-128

Information of Trunk 1

Basic information:

Port type: 100tx

Mac address: 22-22-22-22-22-2c

Configuration:

Name:

Port admin status: Up

Speed-duplex: Auto

Capabilities: 10half, 10full, 100half, 100full,

Flow control status: Disabled

Current status:

Created by: User

Link status: Up

Port operation status: Up

Operation speed-duplex: 100full

Flow control type: None

Member Ports: Eth1/11, Eth1/12,

Console#

3-83