SMC Networks SMC6724L3 manual Command Usage

COMMAND LINE INTERFACE

Command Usage

•Use this command in conjunction with the show running-configcommand to compare the information in running memory to the information stored in non-volatile memory.

•This command displays settings for key command modes. Each mode group is separated by “!” symbols, and includes the configuration mode command, and corresponding commands. This command displays the following information:

-SNMP community strings

-Users (names and access levels)

-VLAN database (VLAN ID, name and state)

-VLAN configuration settings for each interface

-IP address configured for VLANs

-Routing protocol configuration settings

-Spanning tree settings

-Any configured settings for the console port and Telnet

Example

Console#show startup-config

building startup-config, please wait.....

!

!

username admin access-level 15 username admin password 0 admin

!

username guest access-level 0 username guest password 0 guest

!

enable password level 15 0 super

!

snmp-server community public ro snmp-server community private rw

!

vlan database

vlan 1 name DefaultVlan media ethernet state active

!

!

interface ethernet 1/1

switchport allowed vlan add 1 untagged switchport native vlan 1

.

.

.

4-48