SMC Networks SMC6724L3 manual Show ip ospf, 271

IP ROUTING COMMANDS

show ip ospf

Use this command to show basic information about the routing configuration.

Command Mode

Privileged Exec

Example

Console#show ip ospf

Routing Process with ID 10.1.1.253 Supports only single TOS(TOS0) route

It is an area border and autonomous system boundary router Redistributing External Routes from,

rip with metric mapped to 10 Number of area in this router is 2 Area 0.0.0.0 (BACKBONE)

Number of interfaces in this area is 1 SPF algorithm executed 19 times

Area 10.1.0.0

Number of interfaces in this area is 4 SPF algorithm executed 19 times

Console#

Field	Description
Routing Process with ID	Router ID
Supports only single TOS	Type of service is not supported, so you can only
(TOS0) route	assign one cost per interface
It is an router type	The types displayed include internal, area border,
	or autonomous system boundary routers
Number of areas in this router	The number of configured areas
Area identifier	The area address, and area type if backbone,
	NSSA or stub
Number of interfaces	The number of interfaces attached to this area
SPF algorithm executed	The number of times the shortest path first
	algorithm has been executed for this area

4-271