SMC Networks SMC6724L3 manual Show ip dvmrp interface, PIM-DM Multicast Routing Commands, 301

MULTICAST ROUTING COMMANDS

show ip dvmrp interface

Use this command to display the DVMRP configuration for interfaces which have enabled DVMRP.

Command Mode

Normal Exec, Privileged Exec

Example

Console#show ip dvmrp interface

Vlan 1 is up

DVMRP is enabled

Metric is 1

Console#

PIM-DM Multicast Routing Commands

Command	Function	Mode	Page
router pim	Enables PIM globally for the router	GC	4-302
ip pim dense-mode	Enables PIM on the specified interface	IC	4-303
ip pim hello-interval	Sets the interval between sending PIM hello	IC	4-304
	messages
ip pim hello-holdtime	Sets the time to wait for hello messages	IC	4-305
	from a neighboring PIM router before
	declaring it dead
ip pim	Sets the maximum time before sending a	IC	4-305
trigger-hello-interval	triggered PIM Hello message
ip pim	Configures the hold time for the prune state	IC	4-306
join-prune-holdtime
ip pim	Configures the time to wait for a Graft	IC	4-307
graft-retry-interval	acknowledgement before resending a Graft
	message
ip pim	Configures the maximum number of times	IC	4-308
max-graft-retries	to resend a Graft message if it has not been
	acknowledged
show router pim	Displays the global PIM configuration	NE,	4-308
	settings	PE

4-301