SMC Networks SMC6724L3 manual Dynamic Host Configuration Protocol, Configuring Dhcp Relay Service

Provides IP address compatible with switch segment to which client is attached

DHCP Server

DYNAMIC HOST CONFIGURATION PROTOCOL

Dynamic Host Configuration Protocol

Dynamic Host Configuration Protocol (DHCP) can dynamically allocate an IP address and other configuration information to network clients when they boot up. If a subnet does not already include a BOOTP or DHCP server, you can relay DHCP client requests to a DHCP server on another subnet, or configure the DHCP server on this switch to support that subnet.

When configuring the DHCP server on this switch, you can configure an address pool for each unique IP interface, or manually assign a static IP address to clients based on their hardware address or client identifier. The DHCP server can provide the host’s IP address, domain name, gateway router and DNS server, information about the host’s boot image including the TFTP server to access for download and the name of the boot file, or boot information for NetBIOS Windows Internet Naming Service (WINS).

Configuring DHCP Relay Service

This switch supports DHCP relay service for

attached host devices.

If DHCP relay is enabled, and this switch sees a DHCP

request broadcast, it inserts its own IP

address into the request so that the DHCP server will know the subnet where the client is located. Then, the switch forwards the packet to the DHCP server. When the server receives the DHCP request, it allocates a free IP address for the DHCP client from its defined scope for the DHCP client’s subnet, and sends a DHCP response back to the DHCP relay agent (i.e., this switch). This switch then broadcasts the DHCP response received from the server to the client.

3-53