Nokia DNT2Mi sp/mp user manual Configuring ports / G.704 interfaces, Nokia Corporation, DN01145897

Data Network Terminal Single-port and Multiport Operating Instructions

Configure	Configure	Configure
Port 1	Port 2	Port 3

OK EX

Save? OK/Exit OK

EX

Framing format

Basic frame *

TS map

Equal to line *

TS map

Special TS= -- *

Idle Channels
Code FF	*

Sa4...Sa8 bits

11111 *

							Only with D2048
							adapter
		Accept		OK
OK		Framing format			Framing format			Framing format
EX		Basic frame	*		CRC multiframe			BF monitoring
	Dismiss
					Framing format
					No frame
		TS map			TS map		...			TS map
OK			*
EX		Equal to line			First TS=1					First TS=31
OK		TS map			TS map		...			TS map
EX		Special TS=-- *			Special TS=01					Special TS=31
OK		Idle Channels	*		Idle Channels		...			Idle Channels
EX		Code FF			Code FF					Code 00
						OK
OK		TS0 bit Sa4		OK	TS0 bit Sa4				TS0 bit Sa4
EX		Fixed to 1	*	EX	Fixed to 1				Fixed to 0
		TS0 bit Sa5
				OK	TS0 bit Sa5				TS0 bit Sa5
		Fixed to 1	*	EX	Fixed to 1				Fixed to 0

Framing format CRC monitoring

...

				TS0 bit Sa8			OK TS0 bit Sa8
				Fixed to 1		*	EX	Fixed to 1
DTE if alarms		OK		DTE if alarms				DTE if alarms
Disabled	*		EX	Disabled		*		Enabled
Remote loop		OK			Remote loop			Remote loop
Allowed	*		EX		Allowed	*		Not allowed
BER alarm limit		OK			BER alarm limit			BER alarm limit
1E-3	*		EX		1E-3	*		1E-6
BER alarm sever.		OK			BER alarm sever.			BER alarm sever.
B-level	*		EX		B-level	*		AS-level

TS0 bit Sa8

Fixed to 0

Not with D2048 adapter

BER alarm sever.	BER alarm sever.
No alarm	A-level

Figure 42. Configuring ports / G.704 interfaces

66 (128)	© Nokia Corporation	DN01145897
	Nokia Proprietary and Confidential	Issue 2-0 en