Nokia DNT2Mi sp/mp user manual To install DNT2Mi in a modem shelf

Data Network Terminal Single-port and Multiport Operating Instructions

To install DNT2Mi in a modem shelf:

1.Insert DNT2Mi into a free slot in the shelf.

•Push until the unit locks into the stopper at the end of the slot rail.

2.Fasten the locking bar with the thumb screws included to lock DNT2Mi into the shelf.

•Position the locking bar its openings facing upwards and flat side against the upper edge of the shelf.

•Position the thumb screws through the locking bar’s openings into the fastening holes of the shelf and tighten the screws. Alternatively, you can first tighten the screws loosely, then slide the locking bar into its place and tighten the screws firmly.

Openings upwards
Locking bar	Stoppers (at the end
	of each rail)

2

Fasten with thumb screws

Thumb screws

1

Insert into a free slot

Figure 18. Installation of DNT2Mi in a modem shelf

32 (128)	© Nokia Corporation	DN01145897
	Nokia Proprietary and Confidential	Issue 2-0 en