Nokia DNT2Mi sp/mp user manual Statistics, In the Port/Line statistics submenu

Using Q1 menus

9.4Statistics (8)

This menu provides information on port, line, and system statistics.

Port statistics (8,1)

The Port statistics submenu (see Figure 70) allows you first to choose the number of the port.

Line statistics (8,2 and 8,3)

The Line statistics submenu (see Fig. 70) allows you to monitor the signal quality.

In the Port/Line statistics submenu:

•You must first select whether you want to monitor port or line statistics. Then select absolute or relative values. After this, you can define which period you want to monitor. The number of selectable periods can vary from 0 to 100, 0 standing for the current period, 1 for the last period, and 2 for the previous one, etc.

•You can choose between 0 to 100 periods of 15 minutes, or 0 to 30 periods of 24 hours to monitor a number of signal quality parameters according to G.826. For more information on statistic parameters of the line signal display, refer to Section 7.4. The format of the display is as follows:

15 min signal quality: Period 1 (0 d 0 h 21 min)

UATR (Rx): xx

ESR (Rx): xx

SESR (Rx): xx

BBER (Rx): xx

UATR (Tx): xx

ESR (Tx): xx

SESR (Tx): xx

•You can view the values of the statistic parameters monitored since the last reset. See the example below.

DN01145897	© Nokia Corporation	113 (128)
Issue 2-0 en	Nokia Proprietary and Confidential