Nokia DNT2Mi sp/mp Uninstalling a wall-mounted DNT2Mi, To uninstall a wall-mounted DNT2Mi

Data Network Terminal Single-port and Multiport Operating Instructions

5.Fasten the wall-mounting bracket on the wall.

•Position the bracket on the wall and fasten it by screwing the included wall screws into the drilling holes.

6.Lift DNT2Mi on the wall.

•Slide the fixing holes of the mounting bar into the hooks of the wall- mounting bracket and lay the lower end of DNT2Mi down against the wall.

5.7.2Uninstalling a wall-mounted DNT2Mi

To uninstall a wall-mounted DNT2Mi:

1.Switch off the power.

2.Disconnect the cabling.

3.Lift DNT2Mi from the hooks of the wall-mounting bracket.

Figure 16. Uninstalling DNT2Mi from the wall

5.7.3Installing a modem shelf into a 19-inch rack

Before installing DNT2Mi into a modem shelf, install the modem shelf into a 19- inch rack or cabinet.

30 (128)	© Nokia Corporation	DN01145897
	Nokia Proprietary and Confidential	Issue 2-0 en