Nokia DNT2Mi sp/mp Ethernet, DTE interface options continued, DTE interface adapter units

Data Network Terminal Single-port and Multiport Operating Instructions

Ethernet

EC PWR	LMI 10Base-T
EA
EL WL
	CAS

VF

1 8

Figure 10. DTE interface options (continued)

The interface type is selected by installing an appropriate interface unit. You can do this without opening the terminal's case. The interface unit types are given in Table 2.

Table 2.	DTE interface adapter units
Adapter type		Electrically	Connector type	Product code
V.11		V.11, V.10	D37F	DS 62603.11
V.24		V.28 1)	D25F	DS 62602.11
V.35		V.35, V.28	34F	DS 62604.11
X.21		V.11	D15F	DS 62605.11
G.703/64k		G.703	D15F	DS 62609.11
G.703/2M		G.703	SMBM, BNC or	DS 62607.11
			D9F
G.704/2M		G.703	SMBM or D9F	DS 62608.11
EIA-530-A		V.11, V.10	D25F	DS 62610.11
ET		10Base-T	RJ45	E66210.02
				(Router/Bridge)
				E66210.22 (Bridge)
D2048		G.703	RJ45	E62628.01
D2048		G.703	RJ45 or BNC	E62628.10
D2048		G.703	RJ45 or SMB	E62628.11
VF		Analogue 2/4-	RJ45	E62612.02
		wire
1) In accordance with the ITU-T Recommendation V.28, this type of electrical
interface can be used up to 19.2 kbit/s. With proper cabling, however, operation up to
64 kbit/s is possible.

22 (128)	© Nokia Corporation	DN01145897
	Nokia Proprietary and Confidential	Issue 2-0 en