Nokia DNT2Mi sp/mp user manual Maintaining DNT2Mi, Getting general information

Maintaining DNT2Mi

7 Maintaining DNT2Mi

This chapter describes what general information and statistics you can get on the equipment to be monitored. It also deals with possible alarms and faults.

You can access all this information using front panel or Q1 menus. The menus are described in detail in Chapters 8 and 9.

7.1Getting general information

The front panel menu Monitor Info or the Identifications menu, branch 4 on the Q1 main menu, gives the name and type of the unit to be monitored, the codes and versions of HW units and programs to be used.

Identifications

Equipment name:

DNT2Mi

Equipment type:

DNT2Mi mp (T65680)

HW:

Main	E65671.01 A
Mux	E65633.01 A

SW:

S65672.01 A0

Port 1:

V.35 (DS 62604)

Port 2:

X.21 (DS 62605)

Port 3:

V.11 (DS 62603)

Figure 26. Example of general information

In this menu, only the name of the supervised unit is changeable. To change the name, select Modify (Q1 menu option 4,7,2,1). Note that the maximum length of the name is 15 characters.

DN01145897	© Nokia Corporation	49 (128)
Issue 2-0 en	Nokia Proprietary and Confidential