Kicker SS56.2, SS65.2 manual Parts List, COMPONENT CROSSOVER Two way passive crossover to

Parts List

MIDRANGE DRIVER BOOT Protects the magnet and motor

assembly of the Midrange Driver.

(Already attached to the midrange and is removable.)

MIDRANGE GRILL Grill used to protect the driver when doing a

high-lighted installation or mounting through a panel.

COMPONENT CROSSOVER Two way passive crossover to

split the audio signal between the tweeter and midrange.

ALLEN WRENCH Supplied tool used to tighten and loosen wire

connections at the crossover.

BEVEL HEAD SCREWS Supplied screws to mount Midrange

Driver and crossover.

TINNERMAN CLIPS Steel spring anchor used as anchor point for

screws if required.

BUTT CONNECTORS Insulated crimp connectors to connect a 16

gauge wire to another 16 gauge wire.

WIRE BUNDLES 3 sets of high quality 16 gauge speaker wire to

connect your SS Series Components to the crossover and amplifier.

R-TOOLTool used to assist in tightening or loosening the Tweeter Grill Mount Ring.

Shown is an example of how the prongs in the R-Tool line up in the holes of the rings. Once in place you use the R-Tool to tighten or loosen the ring.

6 SS Component Systems