Crossover Mounting
YES
| or |
Car | Do |
When choosing a location for your crossover keep in mind you will need access to it so you can connect your wiring and adjust the tweeter attenuator. Also, DO NOT place the crossover in any location where it will get wet or be in standing water. This will damage the unit!
The bottom of the car door is not a good location. If you must mount the crossover in the car door, exercise caution as water can accumulate in the bottom of the car door. Keep the crossover high in the door and shielded from water.
NO!
| or |
Car | Do |
|
Installation
Once you have selected a mounting location, remove the crossover’s top by pulling it straight off the crossover. It is held in place with 3 clips at the indicated locations.
Using the supplied screws and hardware (or other method if required) mount the crossover.
Place the crossover top back on the crossover and press into place.
Clip
SS Component Systems | 17 |
