Kicker SS65.2, SS56.2 manual Installation, See the diagrams on this page

When mounting to a door panel it is best to get the tweeter as high up on the door as possible and as far forward as possible without interference from the dashboard. Be sure the chosen place is flat and space behind the door panel allows the use of the Tweeter Mounting Nut.

Follow the same rules if mounting to a rear deck, side panel or any other custom location. Be sure you have chosen a flat location with plenty of clearance behind it for the necessary wiring and mounting hardware.

After checking for clearance, cut a 1-15/16” (4.9 cm) hole in the desired mounting location. It may be necessary to cut a 2-1/2” (6.4 cm) clearance hole in any sheet metal or panel behind your chosen mounting panel to allow clearance for the Tweeter Mounting Nut.

				Clearance Hole 2-1/2"
See the diagrams on this page				(6.4 cm)
				Tweeter Mounting Nut
for more details.
		Door Body		Angle Mount Back Ring
				(Optional)
				15 ° Angle Mounting Rin
				(Optional)
				Door Panel
				weeter
				1-15/16" Hole
	Place tweeter into cutout			(4.9 cm)
			ck
	1-15/16" hole	Rear	De
Angle Mount Ring
	(4.9 cm)	or
(Optional)		anel
		P
	Side

Installation

Angle Mount Back Ring (Optional)

Secure with tweeter mount nut

Clearance

Hole 2-1/2"

(6.4 cm) Sheet

. ,Etc arBody C Metal,

SS Component Systems 13