When installing the speaker wire into your car be sure to avoid sharp edges and the possibility of it getting pinched. Be careful to keep it out of the path of moving mechanical parts such as the steering column, brake pedal, gas pedal, clutch pedal, emergency brake, heater or AC control linkage and any other moving mechanical systems. Be careful when
If running the wire into a door, an existing boot in the door jamb is the ideal place to run the wires, but sometimes this does not
exist or is inaccessible. Drilling holes to run
wires through is very tricky, and caution must
be exercised not to drill into other wiring or mechanisms. Any time a wire is run through a
bare hole, it is necessary to insert a rubber or plastic grommet to
protect the wire.
SS Component Systems
Installation
19
