Installation
SEPARATES WITHOUT GRILL
Prepare The Midrange
You will need to have the Phase Plug mounted in the Midrange. Remove any posts in the Midrange and get a Phase Plug from the kit.
Insert Phase Plug into the Midrange and rotate
You should now have a Midrange Driver that looks like this.
Repeat this process for the second Midrange.
The Midrange is now ready to mount under the factory panel or any other panel you are using.
Prepare The Tweeter
You will need to have the Tweeter mounted to the Black Tweeter Flush Mount Ring. Get a tweeter and the ring from the kit.
Insert the Tweeter into the Flush Mount Ring and rotate clock- wise to tighten.
You should now have a Tweeter assembly that looks like this.
Repeat this process for the second Tweeter.
The Tweeter is now ready to mount in the factory panel or any other panel you are using.
8 | SS Component Systems |
