SMC Networks SMC6724L3 manual 282, Syntax Show ip ospf neighbor Command Mode

COMMAND LINE INTERFACE

Field	Description
Cost	Interface transmit cost
Transmit Delay	Interface transmit delay (in seconds)
State	• Disabled – OSPF not enabled on this interface
	• Down – OSPF is enabled on this interface, but interface is
	down
	• Loopback – This is a loopback interface
	• Waiting – Router is trying to find the DR and BDR
	• DR – Designated Router
State (continued)	• BDR – Backup Designated Router
	• DRother – Interface is on a multiaccess network, but is not
	the DR or BDR
Priority	Router priority
Designated Router	Designated router ID and respective interface address
Backup Designated	Backup designated router ID and respective interface
Router	address
Timer intervals	Configuration settings for timer intervals, including Hello,
	Dead and Retransmit

show ip ospf neighbor

Use this command to display information about neighboring routers on each interface within an OSPF area.

Syntax

show ip ospf neighbor

Command Mode

Privileged Exec

Example

Console#show ip	ospf neighbor
ID	Pri	State	Address
---------------	------ ---------------- ---------------
10.1.1.252	1	FULL/DR	10.1.1.252

Console#

4-282