SMC Networks SMC6724L3 manual Displaying the Address Table, Command Usage

ADDRESS TABLE SETTINGS

Web – Click Address Table, Static Addresses. Specify the interface, the MAC address and VLAN, then click Add Static Address.

CLI – This example adds an address to the static address table, but sets it to be deleted when the switch is reset.

Console(config)#mac-address-table static 00-e0-29-94-34-de
interface ethernet 1/1 vlan 1 delete-on-reset	4-141
Console(config)#

Displaying the Address Table

The Dynamic Address Table contains the MAC addresses learned by monitoring the source address for traffic entering the switch. When the destination address for inbound traffic is found in the database, the packets intended for that address are forwarded directly to the associated port. Otherwise, the traffic is flooded to all ports.

Command Usage

•Interface – Indicates a port or trunk.

•MAC Address – Physical address associated with this interface.

•VLAN – ID of configured VLAN (1-4094).

3-85