SMC Networks SMC6724L3 manual 235, 309

MULTICAST ROUTING

Web – Click Routing Protocol, PIM-DM, Interface Settings. Select a VLAN, enable or disable PIM-DM for the selected interface, modify any of the protocol parameters as required, and click Apply.

CLI – This example sets the PIM-DM protocol parameters for VLAN 2, and displays the current settings.

Console(config)#interface		vlan 2	4-165
Console(config-if)#ip	pim	dense-mode	4-303
Console(config-if)#ip	pim	hello-interval 60	4-304
Console(config-if)#ip	pim	hello-holdtime 210	4-305
Console(config-if)#ip	pim	trigger-hello-interval 10	4-305
Console(config-if)#ip	pim	join-prune-holdtime 60	4-306
Console(config-if)#ip	pim	graft-retry-interval 9	4-307
Console(config-if)#ip	pim	max-graft-retries 5	4-308
Console(config-if)#end
Console#show ip pim interface 2			4-309
Vlan 2 is up
PIM is enabled, mode	is Dense.

Internet address is 10.1.1.253.

Hello time interval is 60 sec, trigger hello time interval is 10 sec. Hello holdtime is 210 sec.

Join/Prune holdtime is 60 sec.

Graft retry interval is 9 sec, max graft retries is 5. DR Internet address is 10.1.1.253, neighbor count is 0.

Console#

3-235