SMC Networks SMC6724L3 manual Mode Command Prompt

ENTERING COMMANDS

To enter the Global Configuration mode, enter the command configure in Privileged Exec mode. The system prompt will change to “Console(config)#” which gives you access privilege to all Global Configuration commands.

Console#configure

Console(config)#

To enter the other modes, at the configuration prompt type one of the following commands. Use the exit or end command to return to the Privileged Exec mode.

Mode	Command	Prompt	Page
Line	line {console vty}	Console(config-line)#	4-13
Access	access-list ip standard	Console(config-std-acl)	4-74
Control	access-list ip extended	Console(config-ext-acl)
List	access-list mac	Console(config-mac-acl)
DHCP	ip dhcp pool	Console(config-dhcp)	4-97
Interface	interface {ethernet port	Console(config-if)#	4-118
	port-channel id vlan id}
VLAN	vlan database	Console(config-vlan)	4-162
Router	router {rip ospf dvmrp pim}	Console(config-router)	4-231
			4-246
			4-291
			4-302

For example, you can use the following commands to enter interface configuration mode, and then return to Privileged Exec mode

Console(config)#interface ethernet 1/5

.

.

.

Console(config-if)#exit Console(config)#

4-9